POWER SUPPLY AND THERMAL RECOVERY GROUP

 

Centrifugal pump in AISI 304 stainless steel.

Flow rate indicator analogue flowmeter.

Flow rate adjustment needle valve.

 

SINGLE STAGE PLATE RECOVERY EXCHANGER

 

For the thermal recovery of the wine in counter-current with the already treated and cooled wine. Consisting in particular of:

 

• Frame with steel plates, covered in stainless steel, with side screws for tightening the plate pack in high resistance stainless steel.

• Longherons in stainless steel intended to support the plates and to allow them to slide.

• Plate group in AISI 316 stainless steel constituting the heat exchange surface, complete with relative gaskets.

• Shut-off butterfly valves.

 

GLASS DOSING TANK made in AISI 304 stainless steel complete with glass dosing pump. The same tank is used to dose the washing solutions.

 

RELAUNCH PUMP to the reactor group. Centrifugal type in AISI 304 stainless steel, in special execution, complete with bypass.

 

Set of product and washing connection pipes.          

Complete with fittings in accordance with DIN 11851 standards, butterfly valves, bends, supports. 

The product pipes, in stainless steel, are foreseen for arranging the plant (feeding group and reactor group) at close distances.

 

REACTORS GROUP CONSISTING OF N.2 CONTACT REACTORS

 

Each built in a cylindrical shape, truncated cone base on legs. Built in AISI 304 stainless steel.

Equipped with a special system, designed to optimize the phenomenon of contact between crystals and product. The product/crystals contact time before moving on to the filtration phase is 120 minutes.

The reactor is equipped with a rotating feed device (axial agitator), device for skimming the product at the discharge, vent valve, level, hatch, washing divosphere, use taps.

Completely thermally insulated with polyurethane foam injected into the stainless steel shell constituting the external surface of the container.

 

N. 1 CENTRALIZED COMMAND AND CONTROL PANEL

 

Made using a stainless steel, watertight (IP 55 Class) cabinet comprising:

 

• main switch with safety door lock,

• power circuits for fuel pump, service pumps and agitators,

• control panel and control lights,

• visual alarm device,

• a series of digital regulators for the control of:

recovery outlet temperature,

cooling unit outlet temperature,

spill level in reactors.